:: PSC Ordering Information ::
Please use the Ordering Information chart below to select the part number you're interested in purchasing.
Simply click on the part number to go to the purchase page for that product.

MODEL NO. DESCRIPTION NEMA 4X/IP65 BEZEL 4 to 20 mA ANALOG OUTPUT 0 to 10 VDC ANALOG OUTPUT ALARM OUTPUTS SECONDARY OUTPUT RS485 COM PART NUMBER PSC Process Setpoint Controller YES YES NO 2 NO NO PSC11001 YES YES NO 2 NO YES PSC11004 YES YES NO 1 YES YES PSC11005 YES NO YES 2 NO YES PSC12004 YES NO YES 1 YES YES PSC12005 - Relay Module OMD00000 - Triac Module OMD00001 - Logic/SSR Drive Module OMD00003 PMK5 Panel Mount Adapter Kit (1/4 DIN to 1/8 DIN) PMK50000 RLY SSR Power Unit RLY50000 Single Phase 25 A DIN Rail Mount Solid State Relay RLY60000 Single Phase 40 A DIN Rail Mount Solid State Relay RLY6A000 Three Phase DIN Rail Mount Solid State Relay RLY70000 These models have dual alarm outputs, or single alarm with secondary outputs, with shared common terminals (Form A Type). As a result, these outputs should be fitted with the same type of output module. The main output (OP1) may be fitted with any type of output module. Note: Output Modules are NOT supplied with the controller. When specifying the controller, be sure to purchase the appropriate output module for the Main Control Output and if necessary, the alarm output(s) and secondary output. The controller can be fitted with any combination of output modules that do not have the RS485 option. The Logic/SSR Drive Module is a switched DC source, intended to drive the DC input of an SSR power unit. It should never be connected to a line voltage. All modules are shipped separately and must be installed by the user.